Steps to optimise the performance of woven filter cloths in use
Optimization measures of production process in the use of filter cloth
1, temperature is the first element of the production of composite industrial filter cloth, as the raw material of non-woven industrial filter cloth cloth has hanging glue on each layer, the temperature of the surface of the cloth where the glue powder dissolves is between (300-350)℃. So, to control the drafting pressure roller (built-in heater) to raise the temperature to between (400-430)℃.
2. Place cotton white fabric (medium flat fabric), polyester type non-woven fabric and cotton type non-woven fabric on the loading frame in the ratio of 1:2:3. Place the white cloth on the first layer, the polyester type non-woven fabric on the second and fifth layers, and the cotton type non-woven fabric on the third, fourth and sixth layers.
3. The composite filter cloth is brought into the drafting roller, and after it comes out into the secondary roller group, then the edges of the composite filter cloth are cut and regularised by the cutting knife, and then the specifications of the filter cloth are determined according to the customer's size requirements and put into storage.
概要描述：
Optimization measures of production process in the use of filter cloth
作者：
来源：
发布时间：
2023-02-24
其他资讯